Chapter 26 of New York City Charter outlines the minimum requirements in regards to photoluminescent marking of exit path. This comes in handy to help in organized and quick exit from a building in an event of failure of both the electricity and the power backup. Normally, photoluminescent materials charges when exposed to light. It is therefore a requirement for every building within New York to comply with NYC local law 26.
Photoluminescent marks are made of pigments that charges when exposed to light. The pigments are then able to emit light when other sources of light goes off. As much as the light emitted is not enough to illuminate the building, it is enough to show the direction of exit path out of the building. The standards set for such marks are meant to facilitate the easier exit out of buildings in dark conditions.
In order to comply with NYC local law 26, the photoluminescent to be used should have passed all the standards set by NY Department of Buildings and have a MEA certification number as the evidence for this. MEA is a unit under the department and is responsible in assigning MEA number to the compliant materials in building.
The next group of compliance has to do with the American Disability Act (ADA) and the Occupational Safety and Health Association (OSHA). In addition to all other OSHA requirements, the markers on the stairs are expected to be made of materials that are slip-resistant. The materials that satisfy the ADA and OSHA requirements are usually given a MEA number.
The materials used on the stairways and other exit paths are normally exposed to a lot of friction which contributes to fast rate of wear and tear. In addition to regular scratches when cleaning and when on use, they are also affected by the other environmental elements like temperature changes. For these reasons, the materials used as markers are expected to be highly durable, with lifespan of over 10 years.
When it comes to location of markers, it is required that they are strategically at points close enough where they remain visible under all conditions such as under heavy smoke or large crowds. They should also be easily cleanable as allowing dirt to accumulate on them affects their functionality. The markers will absorb too little light when covered with dirt. The result is that less light will be emitted in dark condition. The duration of illumination too reduces significantly.
The slip-free requirement is not only a requirement of the NY local law 26 but is also meant to make the buildings in New York City safe and reduce legal liabilities that may arise from slip and fall accidents. The requirement therefore emphasis on those of OSHA requirements that all materials used on the stairways and all passageways should be made of slip resistant materials.
To comply with NYC local law 26 is no longer an option but a requirement that works both in the favor of the building owner and the occupants too. It helps minimize the casualties that may arise in an emergency situation.
Photoluminescent marks are made of pigments that charges when exposed to light. The pigments are then able to emit light when other sources of light goes off. As much as the light emitted is not enough to illuminate the building, it is enough to show the direction of exit path out of the building. The standards set for such marks are meant to facilitate the easier exit out of buildings in dark conditions.
In order to comply with NYC local law 26, the photoluminescent to be used should have passed all the standards set by NY Department of Buildings and have a MEA certification number as the evidence for this. MEA is a unit under the department and is responsible in assigning MEA number to the compliant materials in building.
The next group of compliance has to do with the American Disability Act (ADA) and the Occupational Safety and Health Association (OSHA). In addition to all other OSHA requirements, the markers on the stairs are expected to be made of materials that are slip-resistant. The materials that satisfy the ADA and OSHA requirements are usually given a MEA number.
The materials used on the stairways and other exit paths are normally exposed to a lot of friction which contributes to fast rate of wear and tear. In addition to regular scratches when cleaning and when on use, they are also affected by the other environmental elements like temperature changes. For these reasons, the materials used as markers are expected to be highly durable, with lifespan of over 10 years.
When it comes to location of markers, it is required that they are strategically at points close enough where they remain visible under all conditions such as under heavy smoke or large crowds. They should also be easily cleanable as allowing dirt to accumulate on them affects their functionality. The markers will absorb too little light when covered with dirt. The result is that less light will be emitted in dark condition. The duration of illumination too reduces significantly.
The slip-free requirement is not only a requirement of the NY local law 26 but is also meant to make the buildings in New York City safe and reduce legal liabilities that may arise from slip and fall accidents. The requirement therefore emphasis on those of OSHA requirements that all materials used on the stairways and all passageways should be made of slip resistant materials.
To comply with NYC local law 26 is no longer an option but a requirement that works both in the favor of the building owner and the occupants too. It helps minimize the casualties that may arise in an emergency situation.
About the Author:
You can visit the website www.glowscapegvc.com for more helpful information about What It Takes To Comply With NYC Local Law 26
No comments:
Post a Comment